Via Giacomo Saudino, 36

10015 Ivrea, Italy


(+39) 334 855 0474.   |

Privacy Policy

6 Simple Steps to Gaining Final Customer Approval of a Case Study

by | Dec 19, 2022 | Collateral, Case Studies, Content Marketing | 0 comments

6 Steps to Obtaining Final Customer Approval of a Case Study

While they consistently rate among the most effective forms of marketing content with technology buyers1, case studies can be costly to produce. Getting even the happiest of customers to share their stories often requires considerable time and effort. Once they do, there are interviews, writing, editing, review cycles, layout, illustration, etc.

Naturally, when you go to all that trouble, you want to get your money’s worth. You want to use your case studies as soon as possible and for as long as possible.

Unfortunately, things can change rapidly within your customer’s organization. People leave unexpectedly. Attitudes, priorities and philosophies change—including those aimed at how a company’s name is used by others.

That’s why it pays to obtain written customer approval for each case study you produce as soon as it’s ready for publication.

To that end, I’d like to give you a six-step process for securing final customer approval of your next case study. We’ll start by choosing our approval document.

Step 1: Decide upon your approval vehicle

In today’s litigious business climate, it’s always best to have documented customer approval of your published case studies. Documentation preserves a record of your customer’s approval, even if their organization changes. It covers your back in the event of a lawsuit. It may even allow you to keep using a case study despite an adverse change in your customer’s policies.

In general, documentation of case study approval comes in one of two forms:  email approval, or a formal release.

Email approval

Email approval is the faster, simpler approach. Your customer simply returns your approved case study to you in an email that states—using wording you’ve supplied—that you may use the attached case study on your website, in sales opportunities, in newsletters, for PR purposes, and so forth. The form is short and easy to customize.

Email approvals also go through fewer review steps and intermediaries than a formal release form. Why? Because the legal teams don’t get involved.

On the downside, email approval offers a lower level of protection. Approval emails aren’t signed and don’t usually detail conditions of use. A management change or some unfortunate incident—even if unrelated to your solution—could cause a change of heart on the part of the customer. They could then simply withdraw their consent, saying their earlier email approval is no longer valid.

Formal release

A formal release form, on the other hand, is signed, does dictate precise terms of use, and (provided the signatory has the proper authorization) is legally binding. Thus, it provides greater peace of mind for the vendor. On the other hand, obtaining a signed release adds steps to the process and the potential for multiple iterations of each step. This often delays approval while the two side’s legal eagles dicker over terms, conditions, and wording.

A formal release form will usually contain:

  • A statement of purpose (the rights the release conveys)
  • An authority statement (the signatory has read the case study and has the authority to sign the release)
  • The release, which will generally include:
    • Conditions for use of the story
    • Conditions for use of comments and data provided (i.e., re-use of the story material)
    • Authorization of use by the vendor and its channel partners

Naturally, your release form will be customized for each customer, based on what was learned and agreed upon during the project’s pre-approval process and what gets worked out between legal departments.

Formulate a general policy

Your first step in your final case study approval process, therefore, is to decide what level of protection you need. Are you comfortable accepting email approval to streamline the process? Or do you need the added protection of a signed release form, despite the hassles it might entail?

I suggest you start by deciding on a general policy if you don’t already have one in place.

Consider your typical customers. How large are their firms? Are they eager for the additional publicity your case study would afford them? How guarded are they about endorsing vendors and allowing dissemination of their business practices and third-party use of their company name? Consult with your upper management and legal representatives. What are they comfortable with? Your answers to these questions will help you decide what type of approval to seek for most of your customer stories.

Decide on a case-by-case basis

Finally, review your policy and decide on your approval vehicle on a case-by-case basis.

You can do this immediately following pre-approval and project start. Refer to what you know about this customer and what you learned during the pre-approval process. Is this customer significantly different from the norm? What do they require for approval? Must their legal team be involved? What use conditions have they specified?

Also, consider your present situation. For example, if time is of the essence—to meet a publication deadline or to support an upcoming event or scheduled campaign—you may want to settle for email approval even if your normal policy is to pursue a signed release.

Once you’ve decided upon the right vehicle for your current customer, you can send her a draft wording of the agreement for review.

Step 2: Internal review

As soon as you receive a polished draft from your writer, you’re ready to begin reviewing your case study. Even if you face a tight deadline, though, it’s wise to start with an internal review, before you send the story outside your organization.

Establish a team of one or two within your organization who review every case study. They should make sure the document contains relevant, consistent messaging and adheres to your company’s style guidelines. At the same time, send the draft to those closest to the customer, like your account rep or installation engineer. Ask them to check technical details. See if they have any additional data or anecdotes that might enhance the story.

Stay light and agile

A word of warning: limit your internal review to only the necessary participants. The more people involved, the longer it will take to arrive at a clean, polished draft you can send to your customer.

And don’t delay! Email your writer’s draft to your entire internal review team immediately. Tell them when you need their feedback and follow up with those who don’t respond by the deadline. Timely turnaround is important because customers often mirror your own apparent urgency. If you deliver the draft to her several weeks or months after all the interviews were completed, your customer may get the impression the project is of low priority and treat it as such.

Remember, the situation within your customer’s organization will likely change over time. Priorities change. Policies change. Your principal contact may leave the company. Such events tend to slow the review cycle and might even sink the project. The best way to avoid such circumstances is to get your case study into your customer’s hands as quickly as possible.

Getting stories to customers quickly maximizes the chances they will still be happy with your solution, enthusiastic to participate in your case study, and there to keep the review cycle rolling.

Step 3: Channel Partner Review

Distributors, resellers, systems integrators, and other channel partners often play a significant role in customer success stories. They often make first contact with the customer, sell them your solution, look after its implementation at the customer’s site, or otherwise add value to your products and services.

In such situations, it’s their story too. They’ll want to make sure they’re properly represented. They may also be able to add or clarify points that strengthen the story. If that’s the case, make sure to get their input. As with your internal reviewers, send only to those close to the project, tell them when you’ll be expecting their input, and follow up if you don’t hear from them by that date.

Some companies ask channel partners to sign a case study release form. This is usually similar to the one signed by the customer, but with wording that addresses how the partner may use the approved case study for their own marketing.

Step 4: Customer Review

The ease and efficiency with which you complete this step depend directly upon the groundwork you laid during the permission or “pre-approval” phase of your case study project. If you did the work in that phase, this step usually goes smoothly.

Once internal and partner reviews are complete and revisions made, clear any remaining comments, then proofread and spell-check your revised draft. You’ll want to send a fresh, clean copy to your customer.

Send the story as an editable Word (.doc) document, not a PDF. Activate change tracking, and encourage the customer to request revisions and make comments directly in the document itself. This makes it easier for your writer to incorporate the requested changes. If you send the story as a PDF, comments must be written in a separate document and manually transferred later. This slows the process and increases the probability of errors during revision.

Sending your draft and your customer approval vehicle

Attach the story to an email to your customer champion that:

  • Thanks the customer for talking about her experience
  • Announces the attached draft for her company’s review and approval
  • Includes the text for email approval, if applicable
  • Provides instructions on
    • How to edit the document
    • How to deal with the email approval text or release form
  • Gives timeframes for
    • When you’d like to have the document in hand
    • When you’ll follow up
  • States any reasons for special urgency (publication deadlines, events, etc.)

If you are using a release form for this project, attach it to the same email.

Finally, follow up. Customer review time is the biggest unknown in the case study creation process. Customer story expert Casey Hibbert, author of Stories that Sell, says “I’ve seen story signoff take anywhere from an hour to a year.” 2 You have less control over this step than any other, and your project is a lower priority for your customer’s firm than it is for yours. Let’s face it, customers are busy with other things.

Really, all you can do is follow up regularly, with persistence. Always remain polite, positive and respectful. Above all, be patient. It may take some time to get a response.

Step 5: Customer Approval

Once your customer has completed her review and returned all her organization’s revision requests and comments to you, review the requested changes. In most cases—if you laid the proper foundation during pre-approval and your writer has been conscientious—the changes will be minimal and minor, and you can simply hand them to your writer for insertion, polishing and final proofreading.

If any customer comments require significant editing, however, send these back clearly marked in an otherwise clean copy. Explain the additional modifications, so the customer can review them quickly. You may need to negotiate some of the wording to meet everyone’s goals. Keep it friendly. Think win-win, and collaborate with your customer to finalize a mutually satisfying story.

Then, once all the modifications have been agreed upon, be sure to get your customer’s written approval of your use of their story (through either the email or signed release form discussed in Step 1).

Step 6: Thank Your Customer

Always thank customers after they’ve gone through the case study process.

Don’t use email for this task. Email messages are too informal and too easily missed.

At the minimum, send a personalized, handwritten note on a nice card or stationery. Have the not signed by all those involved on your side. You might even have it come “from the desk of” one of your top executives, like the CMO or VP of Marketing.

If you produce case studies frequently, establish a thank-you protocol. Assign a specific point person to follow through and authorize a budget for thank-you expenditures.

What expenditures? Well, other ways to say thank you to case study participants—always in addition to a personal thank-you note—include:

  • Personal phone call from your account rep, telling the customer how much her involvement was appreciated by your organization
  • Branded promotional items with your company logo
  • Framed, high-quality print of the story – these frequently end up on customers’ walls
  • Gift card from a prominent local or online merchant
  • Gift basket of packaged gourmet food items from a specialty delivery company
  • Personalized gift, if your account rep or implementation technician has learned something about the customer’s personal interests
  • Invitations to VIP events you host in the customer’s area or at trade shows they attend
  • Access to your executives through product advisory boards or exclusive events

Remember, saying “thank you” to your customer in a personal way isn’t just polite. It can help deepen your relationship and engender greater loyalty to your brand.

Takeaway Points

  1. Two major keys to obtaining customer approval of your case studies are:
    • A solid pre-approval process
    • A solid final approval process
  2. The groundwork for a quick, smooth final approval of a case study is laid during the pre-approval process.
  3. A good case study final approval process should include the following six steps:
    • Decide on your approval vehicle (email approval or signed release)
    • Internal review
    • Channel partner review (if applicable)
    • Customer review
    • Sign-off
    • Thank your customer

Next Steps

Need help publishing a case study and getting it through all its approval wickets? CopyEngineer can assist with customer pre-approval and post-production sign-off, as well as customer interviews and writing. Email CopyEngineer at Or use my contact form .

Finally, if you’d like to get Technical Response delivered to your email inbox – and receive two free reports on creating better white papers – click here.


1    Eccolo Media 2008 to 2015 B2B Technology Content Survey Reports, Eccolo Media Inc., 2008 to 2015.

2   Hibbard, Casey, Stories that Sell: Turn Satisfied Customers into your Most Powerful Sales and Marketing Asset, AIM Publishers, 2009.

Contact CopyEngineer



Get this FREE white paper:
When you subscribe to my
FREE monthly e-zine,
Technical Response.
The Professional Writers Alliance
Free Report
Not ready to talk about a new copywriting project just yet? Contact me anyway to get your FREE copy of my latest special report:

10 Common Mistakes That Kill White Paper ROI
How to Avoid Them and Generate More Leads

And don’t forget to sign up for my FREE e-zine, Technical Response. Not only will you receive tips for better content marketing and lead generation. You’ll also receive a copy of my white paper, How to Plan a White Paper: A Proven 7-Step Process for Minimizing Headaches and Maximizing ROI, absolutely FREE. Subscribe now!